任何机器使用一段时间以后都会有磨损，包括人还要每年体检呢。在机器的使用过程中我们使用的精心一些，定期来检修一下，可以加长机器的使用寿命！那么双组份打胶机常用到哪些检修方式？

Any machine will wear and tear after being used for a period of time, including annual physical examination. In the process of using the machine, we should use it carefully and check it regularly to prolong the service life of the machine! What maintenance methods are commonly used for two-component sealant dispenser?

强制维修法

Mandatory maintenance law

这种的方法是针对于机器设备的维修日期、类别和内容预先制定具体计划，并严格按计划进行，而不管机器设备实际技术状况如何。优点是便于在维修前作好充分准备，并且能够较有效地保证加工设备正常运转。该的方法适用于须严格保证安全运转的特别重要、复杂的机器设备。

This method is to make a specific plan in advance for the maintenance date, category and content of machinery and equipment, and strictly follow the plan, regardless of the actual technical status of machinery and equipment. The advantage is that it is convenient to make full preparations before maintenance, and can effectively ensure the normal operation of processing equipment. This method is applicable to particularly important and complex machinery and equipment that must strictly ensure safe operation.

定期维修法

Periodic maintenance method

是据机器设备实际使用情况，参考有关维护保养周期，制定机器设备维修工作的计划日期和大致的维修工作量。这种的方法有利于做好维修前准备工作。

According to the actual use of machinery and equipment and referring to the relevant maintenance cycle, the planned date and approximate maintenance workload of machinery and equipment maintenance are formulated. This method is conducive to the preparation before maintenance.

检查后维修法

Maintenance after inspection

这种的方法事先规定机器设备的检查计划，根据检查结果和以前的维修资料，确定维修日期和内容。这种的方法简便易行，但掌握不好就会影响维修前的准备工作。

This method specifies the inspection plan of machinery and equipment in advance, and determines the maintenance date and content according to the inspection results and previous maintenance data. This method is simple and easy to operate, but the preparation before maintenance will be affected if it is not mastered well.

部分检测法

Partial detection method

其特性是双组份打胶机设备各零部件不在同一时间段检测，而是按设备独立部分，按顺序分别进行检测．每次只检测其中部分。这种方法的优点是，由于检测工作量分散，化整为零，因而可利用节假日或非生产时间进行检测，可增加设备的生产时间，提高设备的利用率。

Its characteristic is that all parts of two-component sealant dispenser equipment are not tested at the same time, but are tested separately according to the independent parts of the equipment in order. Only part of the equipment is tested each time. The advantage of this method is that because the detection workload is scattered and the whole is broken into parts, it can be detected during holidays or non production time, which can increase the production time of equipment and improve the utilization rate of equipment.

零部件检测法

Parts inspection method

将需检测的设备零部件拆下来，换上事先准备好的同样零部件，也就是用简单“插入”、“拉出”的方法更换零部件。这种方法的优点是可节省拆装时间，其缺点是需一定数量的备件，占用资金多。

Dismantle the equipment parts to be tested and replace them with the same parts prepared in advance, that is, replace them with simple "insert" and "pull out" methods. The advantage of this method is that it can save disassembly time, while the disadvantage is that it requires a certain number of spare parts and takes up a lot of money.

同步检测法

Synchronous detection method

指生产过程中在工艺上相互之间紧密联系的多台设备，安排在同一时间段内进行检测，实现检测同步化，以减少分散修理所占的?；奔?。

It refers to multiple equipment that are closely related to each other in the process of production, and are arranged to be tested in the same time period to achieve synchronization of testing, so as to reduce the downtime of decentralized repair.

以上的双组份打胶机常用到的检修方式您了解多少呢？欢迎您来我们网站http://www.bwhcul.com留言咨询！

How much do you know about the maintenance methods commonly used for the above two-component sealant dispensers? Welcome to our website http://www.bwhcul.com Message consultation!